By BD7OTO
The Yaesu FT-857D is one of the smallest full-power HF/VHF/UHF all-mode transceivers in the world — compact, capable, and ideal for portable and field operation. But after years of service, its display can age and lose lines and segments, as shown below.

左:正常的 857D 显示。右:使用多年后的 857D 显示,已经缺线严重。
The FT-897 and FT-897D suffer the same problem.
Q1: Can you fix it by fitting an original replacement screen?
The screen is a Yaesu custom part with tightly controlled supply — almost impossible to find in China. Yaesu service holds a small stock, but an official repair is expensive.
Q2: Is there an internal replacement screen?
Yes — a fellow ham in China has developed a third-party internal replacement screen. A fine achievement, given the unusual resolution of this display and the cost of tooling a new one.

内置第三方可替代屏(BG6ADB 的板子)。
The replacement is a circuit board that reads the radio’s display logic, processes it, and drives a third-party screen. It is an internal installation that calls for solid hands-on skills and soldering.
Q3: Can you solve it with an external display?
For this exact problem I designed an external display: it reads parameters from the radio’s CAT port and shows them on its own screen — a subset of the radio’s information, but enough to keep using the rig.
Most modern HF radios have a serial or USB interface for computer control, for use with common contest logging software. The Yaesu FT-8×7 series connects to a computer through its CAT port — in fact a 5V TTL serial port. Working from that, I designed an external display that plugs into the CAT port, reads frequency, mode and other information, and shows it on screen — a real help to fellow owners of these radios.
According to the “CAT (Computer Aided Transceiver) Operation” chapter in the FT-8×7 series manuals, Yaesu documents only a subset of the parameters, such as frequency and mode. So the information this display can show is limited — menu functions, for example, are out of reach. For details, see: https://www.ka7oei.com/ft817_meow.html
The key to this build: an efficient frame-parsing algorithm
Sending over a serial port normally needs the microcontroller to take part in real time, sending data byte by byte and watching it go. With DMA, once you set the start address, data size and other parameters, a dedicated DMA module handles the transfer and the microcontroller is free meanwhile; an interrupt tells the microcontroller when the transfer is done. DMA frees up microcontroller resources, letting it do more things at the same time. The configuration is: DMA receive, circular mode, polled to check whether data has arrived. DMA transmit, single-shot mode, interrupt-driven to check whether the batch has been sent. The serial port itself needs only basic initialization — no UART interrupts at all.

DMA 环形缓冲原理:将 STM32 的 DMA 通道配置成循环模式,得到一个”天然”的环形 buffer。

串口收发数据流程图。
The PCB layout

外扩屏 PCB 版图(LCD12864,2024.05.13)。
- Power switch — left for off, right for on.
- CAT port to the radio.
- Radio microphone jack.
- Hand microphone.
- LCD contrast adjustment.
- “Confirm” button (used in perpetual-calendar mode).
- “−” button (perpetual-calendar mode).
- “+” button (perpetual-calendar mode).
- Mode switch button.
- USB power port (for the FT-817).
- SWD debug interface (for debugging only, not fitted by default).
Finished unit

成品与 CAT 连接线。

成品正面:底部四个按键与 USB 口。
In use

FT-817 机型使用外扩屏。

FT-857 机型使用外扩屏。

FT-897 机型使用外扩屏。
一款适用于八重洲 FT-8×7 系列的外扩屏
文 / BD7OTO
日本八重洲 FT-857D 几乎是世界上最小的满功率 HF/VHF/UHF 全模式收发机,性能强大,适合外出和野外架设电台。经年累月服役之后,显示屏可能会自然老化,导致缺线缺画,影响使用,如下图所示。
同样,八重洲 FT-897、FT-897D 也有类似问题。
问题 1:能不能通过换原厂屏解决这个问题?
该屏幕是日本八重洲单独定制,货源控制非常严格,在国内几乎没有货。八重洲售后有少量存货,不过找售后维修,价格比较贵。
问题 2:有没有内置可替代屏?
目前国内已经有爱好者研发出了内置的第三方可替代屏,这个非常赞,毕竟这个屏分辨率特殊,开模的费用贵。
这款内置可替代屏包含一块电路板,通过读取八重洲原机的显示逻辑,分析并处理,显示在第三方屏上。这个属于内置安装,需要较好的动手能力和焊接工艺。
问题 3:能不能通过外扩屏显示?
针对这个痛点,我设计了一款外扩显示屏,从电台的 CAT 口读取参数并显示出来,可以显示部分参数,方便大家使用。
现在多数的短波无线电产品具有串行或 USB 通信功能,可连接电脑,方便使用常见的无线电比赛软件来操作。八重洲 FT-8×7 系列的机型通过 CAT 口(其实就是个 5V TTL 电平的串行口)连接电脑。根据这个原理,我设计了一款外置显示屏,连接 CAT 口,将频率、模式等信息读取出来,显示到屏幕上,功德无量。
根据八重洲 FT-8×7 系列使用说明书中关于”CAT 电脑辅助操作”章节的介绍,八重洲仅公开了部分参数,如频率、模式等。所以,该屏幕显示的信息是有限的,例如菜单功能就无法实现。详情请参考:https://www.ka7oei.com/ft817_meow.html
作品关键点:高效率的解包算法
串口发送需要单片机实时参与,由单片机一个一个地发送数据并进行监控。如果用 DMA,设置了起始地址、数据大小等参数后,就直接由专门的一个 DMA 模块进行数据发送,发送过程中单片机无需参与。发送完后会产生中断告知单片机。由此可知用 DMA 可以节省单片机资源,让单片机在同一时间里干更多事。配置如下:DMA 接收,循环模式,使用查询方式,判断是否已经收到数据。DMA 发送,单次模式,使用中断方式,判断这一批数据是否已经发送完毕。这里串口只做最基本的初始化就可以,无需开辟任何和串口有关的中断。
作品 PCB 版图
- 电源开关,拨到左侧为关,右侧开。
- 连接电台的 CAT 口。
- 连接电台的话咪接口。
- 连接话咪。
- 调节液晶屏对比度。
- “确认”按键(万年历模式使用)。
- 数值”−”按键(万年历模式使用)。
- 数值”+”按键(万年历模式使用)。
- 不同模式切换按键。
- USB 供电口(FT-817 机型使用)。
- SWD 调试接口(调试期间使用,默认不焊接)。
成品照片


客户照片


