SELECTING SERVICE TYPES · 选择服务类型

本站所有手册或者说明书或者指南提到的设备均是站长自行购买并日常使用的；中文译文或者英文译文为站长自用而作，其中也包含站长自己的补充与原创内容。 仅限本站阅读，禁止转载，禁止传播。

All equipment mentioned in any manual, instruction book, or guide on this site was purchased by the site owner himself and is used by him in daily life. The Chinese or English translations were made for his own use and also include his own additions and original content. For reading on this site only; republication and redistribution are prohibited.

8. 选择服务类型 / SELECTING SERVICE TYPES

对应 PDF 第 21–21 页

Not all service types are enabled when you set your location in the scanner. By default only Custom 1 is enabled. The Appendix has a list of Service Types and their general descriptions. Press Func then the Zip/Services button. Scroll to each Service Type and press E/yes to enable or disable. Press System to exit.

When the scanner displays a Service Type that is not in the Favorite Lists, the scanner will display a "---"

indication.

并非所有服务类型在设置位置后都会启用，默认仅启用 Custom 1。服务类型清单见附录。操作： Func +

List/Services → 滚动到各服务类型按 E/yes 启用/禁用 → 按 System 退出。若收藏列表中有服务类

型未被启用，扫描时会显示 "---"。