本站所有手册或者说明书或者指南提到的设备均是站长自行购买并日常使用的；中文译文或者英文译文为站长自用而作，其中也包含站长自己的补充与原创内容。 仅限本站阅读，禁止转载，禁止传播。
All equipment mentioned in any manual, instruction book, or guide on this site was purchased by the site owner himself and is used by him in daily life. The Chinese or English translations were made for his own use and also include his own additions and original content. For reading on this site only; republication and redistribution are prohibited.
16. 频率/TGID 编程 / PROGRAMMING FREQUENCIES/TGIDs
对应 PDF 第 42–45 页
快速存储频率/TGID / QUICKLY STORING A FREQUENCY/TGID
In scan mode press Channel to hold on any channel. Enter the Frequency or TGID and press E/yes. See also Edit Frequency/TGID. Note: You have to enter a TGID/frequency in the proper format for the system you are holding on. Example: You can't enter a Motorola Type II TGID when holding on an LTR system. Store a Frequency/TGID into a "Quick Save" Favorites List: At Quick Freq/TGID Save?, press E/yes. The scanner will save the Frequency/TGID in a Favorites List called Quick Save Favorites List, in a System called Quick Save System, (with no quick keys assigned), in a Department called Quick Save Department. Store a Frequency/TGID into a Current Favorites List: At Quick Freq/TGID Save?, press ./no. At inquiry Press E/yes.
At Select Favorites List, scroll to the Favorites List where you want to store and press E/yes. At Select System ... At Select Department ... After storing, you will be at the Channel Options menu to complete the settings. If you don't want to edit the channel settings press Avoid to return.
扫描中按 Channel 保持任一频道 → 输入频率或 TGID → E/yes 。注意：TGID/频率格式必须与当前保持的系统类型匹配（如在 LTR 系统上不能输入 Motorola Type II TGID）。出现 "Quick Freq/TGID
Save?" 时：按 E/yes 存入内置 "Quick Save" 列表（Quick Save Favorites List → Quick Save System
→ Quick Save Department，均无快速键）；按 ./no 则依次选择目标收藏列表/系统/部门存入。存储后
进入频道选项菜单可完善设置，按 Avoid 退出。
新建频道与频道选项 / NEW CHANNEL & CHANNEL OPTIONS
Press Menu → Manage Favorites → Favorites List → Review/Edit System → System → Edit Department → Department → Edit Channel. To Create a New Channel, scroll to New Channel and press E/yes. At Input Frequency/TGID, enter the frequency or TGID and press E/yes. To Edit an Existing Channel, scroll to the Channel and press E/yes.
路径： Menu → Manage Favorites → 列表 → Review/Edit System → 系统 → Edit Department → 部门
→ Edit Channel → New Channel（输入频率/TGID）或选已有频道编辑。
Conventional Frequency: enter the frequency and press E/yes. Motorola Type II TGID: enter the TGID.
Motorola Type I TGID: enter the Block Number and Fleet Number, press ./no twice for a hyphen, then enter the Subfleet. EDACS ID in AFS format: enter the Agency Number, ./no twice for a hyphen, then the Fleet and Subfleet. EDACS TGID in Decimal: enter the TGID. LTR TGID: enter the Area Code (0 or 1), ./no twice for a hyphen, then the Home Repeater Number (01-20), ./no once, then the User ID (1-254). I-Call ID: press ./no once then enter the ID. Wildcard I-Call ID: ./no once then enter 0. Hexadecimal IDs: see Data Naming. Note: If the channel is already stored, "TGID or Frequency Exists Accept? (Y/N)" appears; press ./no to return. You can also Avoid wildcard IDs.
常规频率：直接输入频率。Motorola Type II：直接输十进制 TGID。Motorola Type I：块号+车队号， ./no 双按输入连字符，再输子车队号。EDACS AFS 格式：机构号 + 连字符 + 车队/子车队号；十进制直接输。LTR：区号(0/1) + 连字符 + 归属中继号(01–20) + 连字符(单按) + 用户号(1–254)。I-Call（私呼）： ./no 一次输入 "i"
再输 ID；通配 I-Call 输 0。十六进制 ID 用数据命名法输入。若频道已存在会提示 "TGID or Frequency Exists Accept? (Y/N)"，按 ./no 返回。也可回避通配 ID。详细格式表见附录。
| 选项 / Option | 英文原文（EN） | 中文译文（CN） |
|---|---|---|
| Edit Name | See Data Naming. | 频道命名。 |
| Edit Frequency or TGID | Enter the frequency or TGID and press E/yes to save. See also Entering IDs for Partial IDs. | 修改频率/TGID（格式见上方说明， 支持部分 ID）。 |
| Set Audio Type（常 规/Motorola） | Select All if this channel might contain both digital and analog signals. If you are sure the channel is analog set the channel to Analog Only. All: The scanner determines whether the audio is analog or digital. Digital Only: The scanner will receive the channel only if it is carrying APCO 25 digital audio. P25 NAC Option (Conventional Only): Search – searches and displays any NAC tone received; Set P25 NAC – allows you to program a NAC code. Set DMR Color Code. Analog Only: The scanner will only receive analog audio. Set CTCSS/DCS: Search – searches and displays any CTCSS or DCS tone; CTCSS – scroll to the desired tone; DCS – scroll to the desired code; Set Lockout – choose a tone to avoid. Note: You can also store a (blinking) CTCSS/DCS tone when receiving a frequency in scan mode by pressing E/yes. | 音频类型：All=自动判别（默认）； Digital Only=只收 APCO 25 数字语 音；Analog Only=只收模拟语音。 P25 NAC 选项（常规频道）： Search=搜索并显示收到的 NAC； Set P25 NAC=编程指定 NAC。 DMR 色码（Set DMR Color Code，欧版独有）：可编程 DMR 色码（0–15）。亚音 CTCSS/DCS： Search=搜索并显示；CTCSS/DCS= 滚动选择指定亚音/代码；Set Lockout=设定要回避的亚音。技 巧：扫描中收到频率时可按 E/yes 直接存储闪烁的亚音/NAC。 |
| Set Number Tag | This allows you to number a Channel so you can access it quickly from scan hold mode. The default setting is no number tag. 0-999, Blank (No number tag). | 频道数字标签（0–999，留空= 无）。 |
| Set Modulation（仅 常规） | Auto, AM, FM, NFM, WFM, or FMB (FM Broadcast). The default setting is Auto. | 频道调制： Auto/AM/FM/NFM/WFM/FMB （默认 Auto）。 |
| Set Attenuator（仅 常规） | On or Off. The default setting is Off. | 频道衰减 20dB：开/关（默认关）。 |
| Set Service Type | The Appendix has a list of Service Types. Default is Custom 1. Scroll to the Service Type and press E/yes. | 频道服务类型（默认 Custom 1）， 清单见附录。 |
| Set Delay Time | This sets (in seconds) the amount of time the scanner stays on a channel after the transmission has ended before moving to the next channel. A negative delay will force a resume after that number of seconds. The default setting is 2 seconds. -10, -5, 0, 1, 2, 3, 4, 5, 10, or 30 sec. | 信道延迟（信号结束后停留时 间）：-10/-5/0/1/2/3/4/5/10/30 秒，默认 2 秒。负值为"强制恢复"。 |
| Set Priority | This sets the channel as a priority channel while scanning. The default setting is Off. Note: To use Priority ID Scan you must also enable Priority ID Scan for each System. | 设为优先频道（默认关）。若用优先 ID 扫描，还需在各系统启用 Priority ID Scan。 |
| Set Alert | This setting controls when and how the scanner alerts you if the channel becomes active. The default setting is Off. Set Alert Tone (Alert 1-9 or Off); Set Level (1-15 or Auto); Set Alert Light (Color / Pattern). | 频道活动警报（默认关）：音调、音 量、灯光颜色与闪烁模式。 |
| Set Avoid | Stop Avoiding, Temporary Avoid, or Permanent Avoid. The default setting is Stop Avoiding. | 频道回避：停止/临时/永久（默认停 止回避）。 |
| Volume Offset | This sets the Volume Offset for the Channel. -3, -2, -1, 0, 1, 2, or 3. Note: You can also toggle volume offset for a channel in scan hold mode by pressing Func then 0(LVL). | 频道音量偏移：-3 至 +3（0=无）。 扫描保持中可用 Func + 0 快速切 换。 |
| Delete Channel / New Channel | Deletes the Channel. At Confirm Delete? press E/yes or ./no. / See New Channel. | 删除频道（有确认提示）/ 新建频 道。 |